A - Molino de punta cuadrada de acero cobalto, mango Weldon, acabado sin recubrimiento (brillante), 30 grados de hélice, 2 flautas, 1.5000 pulgadas

Lo más importante

Fresas Frontales de la marca Melin Tool Company con 0.0625 inches Cutting Diameter 0.1875 inches Shank Diameter

• Marca: Melin Tool Company
• Categoría: Fresas Frontales
• Atributo clave: 0.0625 inches Cutting Diameter 0.1875 inches Shank Diameter
• Calificación: 1,0/5
• Valoraciones: 1

Datos técnicos destacados

• Peso aproximado: 3.0 lb (1.4 kg).
• Calificación promedio de 1,0/5.
• 1 valoraciones visibles.
• Posición destacada en Fresas de Punta Cuadrada: #2591.

Preguntas resueltas

The Melin Tool A-series uncoated (bright) cobalt steel square nose end mill has two flutes, a center-cutting design, and a 30-degree helix angle for general-purpose machining on most medium-hardness and tough materials, including stainless steel, nickel-based alloys, brass, and iron. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. Cobalt steel can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion. With no coating or surface treatment, this uncoated tool can be used on a range of materials. Cutting diameter tolerance is + 0.0015 to - 0.000". This tool has a Weldon shank. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. Melin Tool manufactures cutting tools such as end mills, countersinks, drills, and thread mills. The company, founded in 1940, is headquartered in Cleveland, OH.

Adecuado para mecanizado de uso general en la mayoría de materiales de dureza media y resistente, incluyendo acero inoxidable, aleaciones a base de níquel, latón y hierro. El acero de cobalto resiste la abrasión y altas temperaturas de corte, y tiene tasas de alimentación más altas que el acero de alta velocidad. Las herramientas sin revestimiento (brillante) no tienen tratamiento adicional de superficie o revestimiento para su uso en una gama de materiales. Dos ranuras ofrecen una mejor capacidad de transporte de virutas que las fresas finales con más flautas, mejorando la capacidad de la herramienta para quitar el material. Los molinillos de punta cuadrada (también llamados extremos cuadrados) crean cortes afilados y sin redondear.